61 Series shade pole asynchronous motor:

Model  

A

B

C

D(ф)

YJF61/10-2

10

39

10--100

2.5--4

YJF61/13-2

13

42

4

YJF61/15-2

15

44

4

YJF61/16-2

16

45

4-5

YJF61/20-2

20

49

4-6

YJF61/25-2

25

54

4-6

YJF61/30-2

30

59

4-6

YJF61/35-2

35

64

4-6

  Technical specifications:

Model  

VOL  

HZ  

FREE LOAD

 ON LOAD


MAX TORQUE
(MN. M)  

STARTING TORQUE
(MN. M)  

OUTPUT   (W)

CURRENT
(A)  

INPUT
(W)  


SPEED
(RPM)  

CURRENT
(A)  

RATEDPOWER
(W)  

SPEED
(RPM)


TORQUE
(MN. M)  

YJF61/10-2

220

　

50

　

0.130

12.0

2820

0.150

15.0

2300

5.88

7.84

4.90

1.4

YJF61/13-2

0.150

15.0

2830

0.170

17.5

2300

8.82

14.70

6.86

2.2

YJF61/15-2

0.170

18.0

2850

0.190

20.0

2350

12.74

15.68

8.82

3.2

YJF61/16-2

0.180

21.0

2850

0.200

23.0

2350

14.70

17.64

9.80

3.7

YJF61/20-2

0.200

22.0

2850

0.210

25.0

2500

16.56

19.60

13.72

4.5

YJF61/25-2

0.230

25.0

2850

0.250

28.0

2550

19.60

22.54

17.64

5.4

YJF61/30-2

0.265

28.5

2850

0.285

31.0

2600

23.00

25.00

20.58

6.45

YJF61/35-2

0.300

31.5

2850

0.320

34.5

2600

26.46

28.90

24.00

7.42

　

I. Main use

61 Series shade pole asynchronous motors are mainly used in microwave ovens, air conditioning, bathing machines, air purifiers, heaters, dish washing machines, automatic warming hands machines, refrigerators, freezing chests, slide projectors, water pumps and oil pumps, etc.

II. Other indexes and descriptions

1.  Rotative direction: cw、ccw

2.  Time rating: S1

3.  Grade of insulation: E

4.  The main characters of motor can be designed according to the voltage (220V, 50HZ or 110V, 60HZ) and the real load of users’ whole machine.

5.   Length of outside shaft can be made according to users’ requirement.

6.   Coil can be sealed by ABS plastics or epoxy.

7.   The end of coil may use all kind of plastic wire or 187#, 250# socket.

8.   There are 30 kinds of brackets made of aluminum or strengthened nylon in factory, these brackets will combine with sliding bearing or ball bearing, the diameter of shaft can be designed from 2.5mm to 6mm, and other kinds of brackets can be made according to users’ requirement.